Flushing Oil Concentrate | Engine Oil Flush

Name: Flushing Oil Concentrate | Engine Oil Flush
Brand: CEM Australia
SKU: foc_250ml

SKU: foc_250ml

$144.99

GST Included

Flushing Oil Concentrate is a professional engine oil flush treatment that removes damaging sludge and carbon deposits to restore power, reduce oil consumption, and prevent expensive engine rebuilds.

Size (litres)

Quantity

Hidden Oil Sludge And Carbon Contamination: The Silent Engine Killers

Over thousands of miles, all engines develop internal deposits of sludge, varnish and carbon that conventional oil changes cannot remove. These contaminants restrict oil flow to critical components, trap heat, accelerate wear and create a cascade of increasingly serious problems: power loss, increased oil consumption, smoke, rough running, and eventually complete failure.

What makes this problem particularly insidious is that each oil change becomes less effective as new oil immediately becomes contaminated by existing deposits. This starts a cycle of accelerated wear that can cut your engine's life in half or lead to catastrophic failures requiring complete rebuilds costing thousands.

Flushing Oil Concentrate uses advanced detergent and dispersant technology to dissolve and suspend hardened deposits throughout your entire engine. It targets areas conventional oil changes can't reach, including oil galleries, piston rings, valve guides and bearings. Once dissolved and suspended, these harmful contaminants are safely removed with the old oil during your oil change.

The results are immediately noticeable: quieter operation, smoother idle, restored power, reduced oil consumption, less smoke and lower operating temperatures. More importantly, by removing these harmful deposits, you're preventing the progressive damage that leads to expensive repairs and rebuilds. Our customers have documented significant success extending engine life and avoiding rebuilds that would have cost thousands.

For best results, use Flushing Oil Concentrate before each oil change, especially in older or high-mileage engines where deposits have had years to accumulate. It's compatible with all conventional and synthetic oils and safe for use in both petrol and diesel engines.
✅ Dissolves and removes harmful sludge and carbon deposits

✅ Frees stuck piston rings to restore compression

✅ Cleans oil passages for improved lubrication and cooling

✅ Reduces oil consumption and smoke

✅ Restores lost power and fuel economy

✅ Decreases engine noise and vibration

✅ Improves throttle response and overall performance

✅ Reduces harmful blowby and emissions

✅ Extends engine life and prevents overheating

✅ Saves thousands by avoiding engine rebuilds or replacements
✔️ POWER LOSS

Restores lost compression and performance by cleaning vital engine components

✔️ OIL CONSUMPTION

Reduces oil burning by freeing stuck piston rings and cleaning valve guides

✔️ ENGINE SMOKE

Eliminates smoke caused by oil passing through carbon-clogged components

✔️ ROUGH OPERATION

Improves idle quality and smoothness by restoring proper internal clearances

✔️ OVERHEATING

Lowers operating temperatures by improving oil flow and heat transfer

✔️ BLOWBY

Reduces harmful blowby gases by restoring proper piston ring sealing
- FOC is used when doing an oil change. Its meant to flush whatever sludge and carbon is present in the engine and old oil.

Steps

Drain the old oil while hot (helps remove as much dirt as possible)

Add new oil to the engine (you can use cheap oil for this part if you want)

Run the engine to warm up the oil and add FOC (check dosage table)

Run engine at fast idle for 30 minutes (aprox.)

Drop the oil again

Add a new, good quality oil and oil filter. Now it will work as expected!

This is the perfect moment to add our AW10 Antiwear for additional oil protection and benefits
Which type of engines can I apply Flushing oil concentrate to?

Diesel and petrol engine. This include trucks, boats, 4x4's, cars & small 2 and 4 stroke petrol engines.

What's the difference between FTC and Flushing oil concentrate?

While FTC works as an additive at anytime to improve combustion, the Flushing oil concentrate (FOC) main purpose is to restore engine cleanliness. This means that the FOC is used when doing an oil change, allowing the carbon and sludge to be removed with the old oil. The result of this is that the new oil that you put in your engine doesn't get contaminated by the previous oil and carbon present in the engine.